MSD Tech Support Forums

Go Back   MSD Tech Support Forums > MSD Ignition Forums > Installation Questions

Installation Questions Wiring and Tech Information

Thread Tools
Old 02-09-2007, 05:19 PM
Posts: n/a
Default MSD DIS-4 to Ford DIS Harness?

I was recently browsing online, and noticed a retailer selling MSD harnesses specifically for use with a DIS-2 or DIS-4 and a Ford DIS Coil Pack. The exact item descriptions were as follows;

"MSD Harness, MSD DIS-4 to Ford DIS Dual Coil Pack" and "MSD Harness, MSD DIS-4 to Ford DIS Single Coil Pack"

Is this something that would work in my application? I have a 2003 Ford Ranger with a 3.0 V6. Is it completely plug-and-play, including the tach adapters, or would the tach adapters still need to be spliced into the harness? What would be the part number of the one I need?
Reply With Quote
Old 02-09-2007, 05:35 PM
msdtechsupport3's Avatar
msdtechsupport3 msdtechsupport3 is offline
Tech Support
Join Date: Feb 2006
Location: El Paso, TX
Posts: 3,332

Your application will require the MSD DIS-4 Ignition Control box (62152) and two Dual Ignition Adapters (89121). The harness that is includded with the MSD box is pre-terminated to accept the adapters.

The "plug and play" harness you may be referring is for the Ford four tower coil packs on the 4- and 8-cyl engines. The coil pack your vehicle uses is a six tower pack which uses a different connector due to the extra trigger lead.
MSD Tech Support
Reply With Quote


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -6. The time now is 05:51 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
2016 MSD Performance