MSD Tech Support Forums

Go Back   MSD Tech Support Forums > MSD Ignition Forums > Installation Questions

Installation Questions Wiring and Tech Information

Thread Tools
Old 09-23-2012, 04:07 PM
Posts: n/a

need help with the fotos i install one in my1981 911 pls help
Reply With Quote
Old 09-22-2013, 06:02 PM
Posts: n/a
Default 1983 3.0 RoW 911 SC with MSD 6AL

Great write up. I just finished mine today less the tach adapter (some need it and some don't). I connected into the existing CD harness using spade connectors. I ran the primary power from the MSD in a wire loom across the back firewall (toward front of car) and dropped down through the rubber engine to body seal right to the starter. A couple of wire clips to secure the loom and instant power. I used the MSD coil wire to the MSD Blaster 2 as the coil wires in the original harness were getting crusty. Put every thing in wire loom, clamped or wire tied it for neat appearance, set the timing and back on the street. Thanks for the support, runs best it ever has.
Reply With Quote


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -6. The time now is 09:30 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
2016 MSD Performance