MSD Tech Support Forums

Go Back   MSD Tech Support Forums > MSD Ignition Forums > Pro Data+ Software

Pro Data+ Software Questions concerning our Pro Data+ Software

Reply
 
Thread Tools
  #1  
Old 04-01-2012, 07:11 PM
thumpn
Guest
 
Posts: n/a
Default cam sensor question for the 6010

I have the 6010 box with a 5.3 the question i have is.

Will the 6010 read the cam sensor the same weather the sensor is a rear mount as in the Ls1 or in the front timing cover as in the Ls2? or they read different?

the reason I ask is cause I am using a ls9 cam with the cam trigger on the front gear in my Ls1 block
Reply With Quote
  #2  
Old 04-02-2012, 08:46 AM
msdtech27
Guest
 
Posts: n/a
Default

you will first need to extend the harness or purchase on from www.eficonnection.com pn 100-00562

if you make your own extension you will need to swap the 2 outside wires going into the cam sensor.

you will also need to install a 1K 1/2 watt resistor across those outside wires for both set ups..

hope this helps
Reply With Quote
  #3  
Old 04-04-2012, 11:59 PM
thumpn
Guest
 
Posts: n/a
Default

thanks for the help it worked perfectly
Reply With Quote
  #4  
Old 07-15-2012, 06:43 PM
RASelkirk
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by msdtech27 View Post
you will first need to extend the harness or purchase on from www.eficonnection.com pn 100-00562

if you make your own extension you will need to swap the 2 outside wires going into the cam sensor.

you will also need to install a 1K 1/2 watt resistor across those outside wires for both set ups..

hope this helps
Hijacking here for future reference. Can you supply a wiring diagram for these resistors? I'm gonna do this soon (L-92 block, 24T reluctor, and LS-2 front cover with cam sensor wiring harness). I'm not understanding where the resistors go, in series or parallel...

TIA!

Russ
Reply With Quote
  #5  
Old 07-16-2012, 03:52 AM
Gaz64 Gaz64 is offline
Senior Member
 
Join Date: Jan 2010
Location: Brisbane, Australia
Posts: 676
Default

Quote:
Originally Posted by RASelkirk View Post
Hijacking here for future reference. Can you supply a wiring diagram for these resistors? I'm gonna do this soon (L-92 block, 24T reluctor, and LS-2 front cover with cam sensor wiring harness). I'm not understanding where the resistors go, in series or parallel...

TIA!

Russ
Across means in parallel.
__________________
Regards

Gary
Reply With Quote
  #6  
Old 07-16-2012, 08:11 AM
msdtech27
Guest
 
Posts: n/a
Default

you need to "bridge" the 2 outside wires..
Reply With Quote
  #7  
Old 09-13-2012, 09:19 AM
msdtech27
Guest
 
Posts: n/a
Default

you will need a 1K 1/2 watt resistor across the 2 outside wires, this of course after you swap the 2 outside wires.
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:38 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
2016 MSD Performance