Results 1 to 5 of 5

Thread: TWIN engined car using mc4

  1. #1
    Join Date
    Sep 2018
    Posts
    11

    Default TWIN engined car using mc4

    Hi chaps ,

    I built a car with two straight 6 engines ,called medusa ...













    it uses 2 aj6 jaguar enignes , a 4.0 and a 3.6 ...and runs on lpg .


    i am just developing it ,after its first trials a couple of weeks ago , and i have decided i need a more powerful spark .


    my original plan was to use two 6A boxes i have ,and use the points dstributor on the 3.6 ,and the mag pickup distributor on the 4.0 to trigger them .

    Then i had a an idea ! lol.


    i have a dis 2 progr ,and a mc4 bike box.

    could i use the mc4 ,or the dis2 , feed one channel from the points and trigger that coil with that channel , and use the other channel for the mag dizzy ,and that coil .


    i do have the 3 bar sensor , so could map it for vac advance too , and use the dizzy advance for each engine , or the mc4 box timing curve .


    would the mc4 be able to fire a 6 cyl engine through a distributor ?thats a 6 pulses per 2 rev s so at 6k rpm 18k pulses ...


    flight of fancy or workable !1??

    regards
    robert.

  2. #2
    Join Date
    Jan 2010
    Location
    Brisbane, Australia
    Posts
    961

    Default

    Not sure on your ignition, but the steering wheel is from a Rover P4 90 - 105?

    A lot of handwork there, I'm sure it gets lots of looks.
    Regards

    Gary

  3. #3
    Join Date
    Sep 2018
    Posts
    11

    Default

    Quote Originally Posted by Gaz64 View Post
    Not sure on your ignition, but the steering wheel is from a Rover P4 90 - 105?

    A lot of handwork there, I'm sure it gets lots of looks.
    yes found down the scapppy covered in green algea , but it cleaned up well .

    i have only had it on the rd a couple of days , then had to fly out , but in those two days it definately got a bit of commentary

    regards
    robert

  4. #4
    Join Date
    Sep 2018
    Posts
    11

    Default

    any help msd ?

  5. #5
    Join Date
    Sep 2018
    Posts
    11

    Default

    have i just fused the msd tech department ?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •