Results 1 to 2 of 2

Thread: 6014 “Latched” setting

  1. #1
    Join Date
    Apr 2017

    Default 6014 “Latched” setting

    Hi. I’m not running a trans brake or 2 step right now. Should the setting be “enabled” or “disabled” I had it set on “disabled” But it seems to be breaking up at 4000 rpm and I’m thinking this may be some of the issue. I went back and read through the instructions but that part seems confusing to me for some reason. Thanks

  2. #2
    Join Date
    Jan 2018


    We normally recommend having it on enabled. The latched feature is there mainly for standard vehicles, what it does is if the 2 step wire is connected to the clutch it will not reactivate unless it sees at least a third of the RPM drop. So if it is set at 3000 rpm it needs to drop 1000 rpm to reactivate. I hope this helps.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts