Results 1 to 7 of 7

Thread: Rotor melting

  1. #1
    Join Date
    Jul 2016
    Posts
    6

    Default Rotor melting

    Just installed a rotor phasing kit. My previous rotor tip melted. Adjusted rotor phasing and burned up in about 2 minutes of run time. MSD power grid hvc 2 coil. Small block Chevy small msd pro billet distributor. Heads are grounded,plugs are gapped .030 can anyone give me some other things to check that I'm over looking?

  2. #2
    Join Date
    Jan 2018
    Posts
    30

    Default

    Good morning polarisxlt96,

    what is the part number on your distributor and the part number of the rotor you ordered? also what do you have set up for timing?
    shake-n-bake

  3. #3
    Join Date
    Jul 2016
    Posts
    6

    Default

    Quote Originally Posted by msdtech50 View Post
    Good morning polarisxlt96,

    what is the part number on your distributor and the part number of the rotor you ordered? also what do you have set up for timing?
    Dist p/n 8570 rotor p/n 84211 timingnis locked at 38 degrees

  4. #4
    Join Date
    Jan 2010
    Location
    Brisbane, Australia
    Posts
    955

    Default

    How did you adjust rotor phasing?
    Regards

    Gary

  5. #5
    Join Date
    Jul 2016
    Posts
    6

    Default

    Drilled a hole in my cap,connected my timing light and adjusted to leading edge.

  6. #6
    Join Date
    Jan 2018
    Posts
    30

    Default

    we will get in contact with you shortly
    shake-n-bake

  7. #7
    Join Date
    Jan 2010
    Location
    Brisbane, Australia
    Posts
    955

    Default

    Quote Originally Posted by polarisxlt96 View Post
    Drilled a hole in my cap,connected my timing light and adjusted to leading edge.
    That's good to hear.

    Hopefully MSD will fix your issue here.

    Gary
    Last edited by Gaz64; 08-28-2018 at 07:51 PM.
    Regards

    Gary

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •