Results 1 to 1 of 1

Thread: stal issu, timing issu, return to idle issue

  1. #1
    Join Date
    Jun 2013

    Unhappy stal issu, timing issu, return to idle issue


    After hard breaking OR engine break SOMETIME the engine stall.
    NOT EVERY TIME but I have notice ,in the display, that Atomic lowering the timing to 3-4 degrees. and then the IAC stugle to keep engine running.
    I can hear it "snoring" from TBI.

    Often It have no problem and that's when Atomic DON'T pull timing. Then it just running great.

    Whay does Atomic Pull timing sometimes and sometimes not?

    I have this sinse 2013 so I have hade a lot of time looking at the display and try to figure out what the problem is, eaven if it's just a summer car.

    It's a Ford 1959
    6A BOX

    The Timing:
    initial 14-16
    advanse 33
    Total 1700
    vac Ported 15

    Idle 0,95
    cruse 1.03
    WOT 0,85

    IAC at idling
    N 1-3
    D 14-16

    Idling at 525 RPM Thight converter

    Last update was 216-04
    Last edited by kenta; 07-12-2018 at 05:35 AM.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts