Results 1 to 7 of 7

Thread: 12V Output Error alert

  1. #1
    Join Date
    May 2016
    Posts
    4

    Default 12V Output Error alert

    Can anyone explain what "12V Output Error" means?
    It is not listed in the 7730 Installation Instructions.

    We turn the grid on and the LED goes red, with a 12V Output Error alert

  2. #2
    Join Date
    Jan 2018
    Posts
    63

    Default

    What ignition system are you using with the grid system? As, this could be a grounding issue. But, we need to know what ignition box you have first.

  3. #3
    Join Date
    May 2016
    Posts
    4

    Default

    We are using a MSD Pro Mag 44, along with a Leahy device.
    Last edited by RalphMSD; 02-02-2018 at 02:41 AM.

  4. #4
    Join Date
    Jun 2009
    Posts
    465

    Default

    Are you currently using any of the Power Grid modules ex: ARC, Boost controller etc.. ?

  5. #5
    Join Date
    May 2016
    Posts
    4

    Default

    No we aren't

  6. #6
    Join Date
    May 2016
    Posts
    4

    Default

    Whoever wrote the software knows exactly what this error message means. Which wire is it referring to and what are the voltage limits the software is looking for? Can we look at something in a grid log file? This error message needs to be added to the instructions.

  7. #7
    Join Date
    Jun 2009
    Posts
    465

    Default

    The 12v output error is the circuit for the CAN BUS voltage

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •