Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: custom drawings

  1. #11
    Join Date
    Jan 2008
    Posts
    10,542

    Default

    and where are you using those solenoids?

    the controller ...takes the load on the nitrous solenoids....
    so i assume , you wanted to use those in line?

    more info would help (

  2. #12
    mcat Guest

    Default

    Quote Originally Posted by msdtech1955 View Post
    and where are you using those solenoids?

    the controller ...takes the load on the nitrous solenoids....
    so i assume , you wanted to use those in line?

    more info would help (
    the progressive box runs through the solenoid grounds. the relays will be for the hot side of the solenoinds when the system is armed..

  3. #13
    Join Date
    Jan 2008
    Posts
    10,542

    Default

    this is the drawing....they gave you right?
    Attachment 2055

  4. #14
    mcat Guest

    Default

    Quote Originally Posted by msdtech1955 View Post
    this is the drawing....they gave you right?
    Attachment 2055
    that does appear to be it, .
    can you draw me up the way you would do it..
    i have a relay activated by the activate lead off the eddy box to make my possitives on the solenoid hot. that way the eddy box is not powering the hot side of the solenoids

  5. #15
    flight71 Guest

    Default

    Looking for a diagram using 7220 ignition box, 8982 start/retard controller to retard the timing for the nos and the start retard, a 8950 RAS, 8737 3step, and 2 8961 relays. I am wanting to turn the nos solonoids on and retard the timing, at the release of the trans-brake button. Any help greatly appreciated!

  6. #16
    Join Date
    Nov 2014
    Posts
    1

    Default

    Is this still going on?

  7. #17
    Join Date
    Feb 2016
    Posts
    1

    Default need nitrous diagram

    I need a drawing for wiring the following. msd 6 digital plus, 8969 msd window switch,2 pin fuel pressure safety switch, transbrake,nx 2000 nitrous controller, using 5 pin relays,also using 3 pin wos on carb.,single stage nitrous. Thanks in advance for your help. Whisnane

  8. #18
    Join Date
    May 2018
    Posts
    1

    Default

    I was wondering if you guys could get a diagram for power grid with power module as a progressive, to where the transbrake will interrupt and not activate noids? Also have a tps if I could use that instead of WOT switch?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •