MSD Tech Support Forums

MSD Tech Support Forums (
-   Power Grid Diagram Help (
-   -   Help for 7730 (

greenduster71 10-12-2012 03:51 AM

Help for 7730
i am looking for the wiring diagram and screen directions for an electric solenoid to shift from low to high gear using the shift light output (yellow/white stripe) wire shifting at 7200... ignition is all power grid.. thank you for any help you can give me...:001_unsure:

msdtech1955 10-12-2012 08:41 AM

3 Attachment(s)
HERE YOU GO!:thumbup:

Attachment 2491

Attachment 2492

Attachment 2493

greenduster71 10-12-2012 11:53 AM

thankyou for all the will this way hold the solenoid open until the 7200 rpm target is reached,then it releases? do i put both of the settings at 15,000?:001_unsure:

msdtech1955 10-12-2012 11:59 AM

so, this is a "SPRING LOADED " shifter ...where you remove 12 volts to make it shift.

greenduster71 10-12-2012 12:28 PM

Yes, from biondo racing products

greenduster71 10-12-2012 02:05 PM

do you have a diagram for my type, spring loaded ? and do i put the points to 15,000? thanks again for your help..

All times are GMT -6. The time now is 09:49 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
2016 MSD Performance